Razorcut Plasma Cutter with Torch 45Amp

Description

The Razorcut Plasma Cutter with Torch 45Amp is an inverter-based plasma cutting machine produced using the latest in IGBT technology. This machine is reliable, robust and stacked with features that you can expect from a quality plasma cutter. The Razorcut 45 produces a high temperature plasma stream providing effortless cutting of all electrically conductive materials including steel, cast Iron, stainless steel, copper, aluminium brass etc. The Razorcut 45 is equipped with a high quality SureGrip TRF-45-6-CC1 plasma torch with Euro connection, developed specifically to enhance and improve the cut quality of the Razorcut 45 machine. Connection of the TRF-45-6-CC1 plasma torch provides effortless starting of the cut with powerful, fast and accurate cutting capability, additional is the benefit of longer life cycle consumable electrodes and cutting tips. The Razorcut 45 is an exceptional machine that is suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services. The Razorcut 45 is packaged with a tough SureGrip TRF-45-6-CC1 plasma torch, earth lead and air regulator.

Features

• High Performance And Cutting Capacity
• Cuts Steels, Stainless, Cast Iron, Brass, Copper, Aluminum
• 45 Amp – 5/8″ Cut On Steel
• 230 Volt Inverter With Power Factor Correction
• Industrial Rated, User-Friendly, Lightweight and Portable
• Cutting Capability: As Thin As 0.02″ Sheet Metal Up To As Thick As 0.5″ Steel
• Built-In Handle On Unit Makes It Simple To Grab And Go
• Cutting Edge Inverter Technology Makes Maintenance And Repair Simple And Cost Effective
• Can Be Used With Portable Power

What’s Included

• Razorcut 45 Machine
• 19ft TRF-45-6-CC1 Plasma Torch
• 13ft x 5/8″ Earth Clamp
• Instruction Manual

Specifications

• Power Supply / Phases: 230V – 1Ph +/- 15%
• Duty Cycle @ 104°F: 30% @ 45Amps
• Rated Power: 5.50 KVA
• Output Current Range Plasma: 20-40 Amps
• Rated Output Voltage: 96 Volt
• Efficiency: 90%
• Insulation Class: H
• Protection Class: IP21S
• Plasma Arc Starting: Piolt L/F
• Air Flow Pressure: 0.5 MPA (75 psi)
• Air Flow Rate: 6.70 CFM
• Cutting Thickness – Clean: 5/8″
• Cutting Thickness – Severance: 25/32″
• Compliance: CAN/CSA E60974-1
• Compliance: ANSI/IEC 60974-1
• Dimensions: 18.1″ x 6.69″ x 12.99″
• Weight: 20.2 lbs.
• Warranty: (3) Years