The Weld-Pak 180i MP DV welding machine is a lightweight and portable welder that connects to 120 or 230 volt power. This machine is an excellent choice for MIG, Stick, Flux-Cored, and DC TIG welding. The intuitive user interface, easy setup, and full list of accessories permits welding in no-time. The simple two knob control allows easy set up between the welding process. With the ability to switch to multiple processes you’ll be ready to tackle any project. The Lincoln Electric Weld-Pak 180i MP DV is an excellent choice!
Big Value and Performance in a Small Package
The Weld-Pak 180i MP DV is a multi-process, dual-voltage welder that can get you welding in less than 10 minutes right out of the box. It’s built for hardworking professionals, but easy enough for anyone to use regardless of skill level. This rugged machine lets you weld up to 1/2″ thick materials and can handle MIG, flux-cored, stick, TIG and aluminum welding. It may pack a lot of power, but the portable 180i MP only weighs 34.5 pounds so you can use it anywhere you can plug it in. And with automatic process detection, an inverter-based system to keep energy bills down and a simple interface, the 180i MP adds value and ease of use to the standard Lincoln Electric field proven dependability and industry-leading support. Rugged and dependable – you will never have to buy another one!
Applications
Contractors
Metal Fabrication
Farm and Ranch
Maintenance and Repairs
Light Construction
Autobody Shops
Hobby and Home
Enhanced Durability
Fully adjustable drive system reduces the chance of wire tangling and crushing.
Easy-turn numeric drive tension indicator identifies optimized ranges for different wire types.
Capable Performance
Forgiving arc makes dialing in your application easy.
Smooth arc starts with minimal spatter.
Wide 20-180 amp welding output range for MIG, FCAW and Spool Gun
Wide 10-165 amp welding output range for DC TIG
Wide 25 to 160 amp welding output range for Stick
MIG weld 24 gauge up to 5/16 in. sheet metal in a single pass. Weld up to 5/16 in. steel using self-shielded Lincoln Electric NR-211-MP wires. Stick weld to 3/16 in. (4.8 mm), and TIG weld to 1/8 in. (3.1 mm).
Optional spool gun for MIG welding aluminum up to 3/16 in sold separately
Compact Design
Lightweight and portable at 34.5 lbs.
Conveniently plugs into household 230 volt or 120 volt power with included adaptor.
Features and Specs
Features
Multi-Process unit capable of MIG, TIG, and Stick welding
MIG weld at 20-180 Amps
MIG – Wide 20-180 amp welding output for MIG, FCAW and Spool Gun allows for welding 24 gauge to 3/8″ welding material
DC TIG weld at 10-165 Amps
TIG – Torch and Foot pedal sold separately; Wide 10-165 amp range permits welding on thin and thick steel and stainless
Stick weld at 25-160 Amps
Stick – Smooth arc starts prevent stick. Heavy duty electrode holder and cable included
Fully adjustable drive system reduces the chance of wire tangling and crushing
Brass to brass gun connection enhances conductivity
Fast toolless drive roll changeovers
Simple two knob operation
Single button for process selection
Lightweight and portable at 34.5 lbs.
Conveniently plugs into household 230 volt or 120 volt power with included adaptor
Perfect for the shop, farm, home or auto body shops
What’s Included
Magnum 100L gun and 10 ft. (3.0 m) cable assembly with brass connection and 8-pin trigger connector
.025 in. (0.6 mm) contact tip
.030 in. (0.9 mm) contact tip
Gasless nozzle for Innershield welding
Gas nozzle for MIG welding
Spindle adapter for 8 in. (203 mm) diameter spools
.025 – .035 in. (0.6 – 0.9 mm) wire diameter dual track drive roll for MIG and flux-cored welding
Harris Gas Regulator and 52 in. (1.3 m) hose for use with Ar/ CO2 blend gases.
Work clamp and 10 ft. (3.0 m) cable
Electrode holder with 10 ft. cable for stick welding
Reviews
There are no reviews yet.